| 1. Brand | SICOPRO |
| 2. Model | MP102 |
| 3. Product Type | Automotive refinishing spray gun |
| 4. Feed Type | Gravity feed |
| 5. Operation | Pneumatic / compressed air |
| 6. Cup Position | Top mounted |
| 7. Cup Material | Plastic |
| 8. Body Material | Metal |
| 9. Body Finish | Polished silver / chrome-like |
| 10. Trigger Type | Manual lever |
| 11. Atomization | Fine atomization |
| 12. Spray Pattern | Adjustable fan pattern |
| 13. Fluid Flow | Adjustable |
| 14. Air Pressure | Adjustable |
| 15. Coverage | Even with correct setup |
| 16. Finish Goal | Smooth automotive finish |
| 17. Vehicle Panels | Suitable |
| 18. Car Body Repair | Suitable |
| 19. Refinish Work | Suitable |
| 20. Basecoat | Suitable with matching nozzle |
| 21. Clear Coat | Suitable with matching nozzle |
| 22. Primer | Suitable with matching nozzle |
| 23. Metallic Paint | Application shown |
| 24. Pearl Paint | Application shown |
| 25. Touch-Up Work | Suitable with smaller nozzle |
| 26. Detail Painting | Suitable |
| 27. Nozzle Sizes Shown | 1.0 / 1.3 / 1.4 / 1.7 / 2.0 mm |
| 28. 1.0 mm | Fine finish / touch-ups |
| 29. 1.3 mm | Basecoat |
| 30. 1.4 mm | Clear coat |
| 31. 1.7 mm | Primer / surfacer |
| 32. 2.0 mm | Thicker coatings |
| 33. Pressure Guidance | Avoid excessive pressure to limit overspray |
| 34. Distance Guidance | Maintain consistent spray distance |
| 35. Viscosity Guidance | Use proper coating viscosity |
| 36. Cleaning | Clean after every use |
| 37. Nozzle Care | Keep nozzle and needle clean |
| 38. Weekly Check | Inspect nozzle, cap, air leaks and trigger |
| 39. Monthly Service | Deep clean and inspect seals |
| 40. Air Supply | Clean, dry compressed air recommended |
| 41. Storage | Store clean and dry |
| 42. Safety | Use respirator, gloves, eye protection and proper ventilation as appropriate |
