The SICOPRO MP102 gravity feed spray gun supports a broad range of finishing jobs with nozzle sizes shown from 1.0 mm to 2.0 mm for fine finishing, basecoat, clear coat, primer and higher-viscosity coatings.
SICOPRO MP102 Nozzle Size Application Guide
Choose a nozzle size according to coating viscosity and finish requirements. The MP102 platform is shown with 1.0, 1.3, 1.4, 1.7 and 2.0 mm application options.
Product Attributes
| 1. Brand | SICOPRO |
| 2. Model | MP102 |
| 3. Product Type | Gravity feed spray gun |
| 4. Operating Type | Pneumatic / compressed air |
| 5. Feed System | Gravity feed |
| 6. Cup Position | Top mounted |
| 7. Cup Material | Plastic |
| 8. Body Material | Metal |
| 9. Body Finish | Polished silver / chrome-like |
| 10. Trigger | Manual lever |
| 11. Atomization | Fine and controllable |
| 12. Spray Pattern | Adjustable |
| 13. Fluid Flow | Adjustable |
| 14. Air Pressure | Adjustable |
| 15. Finish Quality | Smooth, even finish when correctly set |
| 16. Nozzle Range Shown | 1.0–2.0 mm |
| 17. 1.0 mm Nozzle | Fine finish |
| 18. 1.0 mm Common Use | Touch-ups |
| 19. 1.0 mm Common Use 2 | Small parts |
| 20. 1.0 mm Common Use 3 | Detail painting |
| 21. 1.0 mm Common Use 4 | Thin materials |
| 22. 1.3 mm Nozzle | Basecoat |
| 23. 1.3 mm Common Use | Metallic paint |
| 24. 1.3 mm Common Use 2 | Pearl paint |
| 25. 1.3 mm Common Use 3 | General purpose |
| 26. 1.4 mm Nozzle | Clear coat |
| 27. 1.4 mm Common Use | Top coat |
| 28. 1.4 mm Common Use 2 | High-gloss finish |
| 29. 1.4 mm Common Use 3 | Smooth surface finish |
| 30. 1.7 mm Nozzle | Primer |
| 31. 1.7 mm Common Use | Surfacer |
| 32. 1.7 mm Common Use 2 | High-build paint |
| 33. 1.7 mm Common Use 3 | Filler |
| 34. 2.0 mm Nozzle | High-viscosity paint |
| 35. 2.0 mm Common Use | Thick coatings |
| 36. 2.0 mm Common Use 2 | Industrial paint |
| 37. 2.0 mm Common Use 3 | Anti-rust paint |
| 38. 2.0 mm Common Use 4 | Latex paint |
| 39. Automotive Detail | Suitable |
| 40. Car Refinishing | Suitable |
| 41. Primer / Surfacer Work | Suitable |
| 42. Industrial Application | Suitable |
| 43. Paint Viscosity | Match viscosity to nozzle size |
| 44. Spray Distance | Keep consistent for even coverage |
| 45. Pressure Setup | Use correct pressure for efficient atomization |
| 46. Cleaning | Clean nozzle and needle after use |
| 47. Air Supply | Clean, dry air recommended |
| 48. Storage | Store clean and dry |
| 49. User Type | Professional and skilled DIY |
| 50. Safety | Use appropriate PPE and ventilation |
Selection Advice
Smaller nozzles suit finer and thinner materials, while larger nozzles suit primers and higher-viscosity coatings. Always match nozzle size, viscosity, pressure and spray distance to the specific coating system.
